Local Declaration Guidelines


Local declaration style guidelines for contributing to the Eiffel Software code repository.

Feature Arguments

Feature arguments should begin with the prefix a_ and nothing more. The prefix a_ represent a contraction of the word argument and does not represent the singular inflection - a noun - Therefore it is not valid to utilize an when the suffixed argument word begins with a vowel. The following is a correct usage:

perform (a_string: STRING; a_integer: STRING): CHARACTER
        -- An example using routine argument variable names.
    do
    end

Here, the second argument a_integer, is not considered A Integer but The Argument Integer, hence the use if a_ instead of _an_.

Indexing Routine Argument Variable Names

In rare cases there is a need to use the same name on a routine's arguments, which of course no useful language would allow. Instead a slight form of indexing needs to be applied. In this case the use of other embedded in the variable name would suffice for most cases.

compare_strings (a_string: READABLE_STRING_GENERAL; a_other_string: like a_string): INTEGER_8
        -- An example using 'other' to index the second routine argument name
    do
        ...
    end

In-line Agent Routine Arguments

When working with an in-line agent, to prevent conflicts with the enclosing routine's arguments, the prefix ia_ should be used. The same rules regarding English language rules apply here as they do to routine arguments. The ia_ prefix represents an In-line Argument.

perform (a_string: STRING; a_integer: STRING)
        -- An example using in-line agent argument variable names.
    do
        process (agent (ia_string: STRING; ia_integer: INTEGER)
            do
                ...
            end (a_string, a_integer))
    end

Nested In-line Agent Routine Arguments

Although rare, a nested in-line agents need exists. When dealing with nested in-line agent routine argument names the prefix should contain the nested index, with the container in-line agent using either a 1 or no index in the prefix names. First/Top-level in-line agents (those that are not nested) can use the aforementioned ia_ prefix or use i1a_, the former being preferred. A second-level (first nested level) in-line agent should use the prefix i2a_, third-level i3a_ and so forth.

perform (a_string: STRING; a_integer: STRING)
        -- An example using in-line agent argument variable names.
    do
        process (agent (ia_string: STRING; ia_integer: INTEGER)
            do
                    -- An example of an nested, in-line agent
                process (agent (i2a_string: STRING; i2a_integer: INTEGER)
                    do
                        ....
                    end (ia_string.as_lower, ia_integer)
            end (a_string, a_integer))
    end

Local Declarations

Routine local declaration should also be prefixed to prevent potential conflicts between routine arguments or class attributes. The prefix l_ is typically used for variable moniker names longer than two character. There are other exceptions, these are discussed below.

Well Known Variable Names

Indexing/counter variables, as used in iteration loops, should not use a local prefix and should be terse. The variable i should be use to indicate it is an index variable. Additional index variables should follow alphabetically from i onwards.

Generally, paired with an indexing/counter variable, a stopping condition count or number-of-items variable is also used. There are two conventions used for this, generally used interchangeably; A count will use the same rules for local declarations and be called l_count, a number-of-items variable will use a well-known contracted variable name 'nb.

perform (a_array: ARRAY [INTEGER])
        -- An example using index and number-of-items local variable names.
    local
        i, nb: INTEGER
    do
        from
            i := a_array.lower
            nb := a_array.upper 
        until
            i > nb
        loop
            ...
            i := i + 1
        end
    end

The case will commonly arise when multiple counters/number-of-items variables need to be used. In such cases the counter/number-of-items variable should be suffixed with the associated indexing/counter variable name. This is akin to BASIC's NEXT x instruction:

perform (a_array: ARRAY [ARRAY [INTEGER]])
        -- An example using multiple index and number-of-items local variable names.
    local
        l_sub_array: ARRAY [INTEGER]
        i, nb_i: INTEGER
        j, nb_j: INTEGER
    do
        from
            i := a_array.lower
            nb_i := a_array.upper 
        until
            i > nb_i
        loop
            l_item := a_array[i]
            if l_item /= Void then
                from
                    j := l_item.lower
                    nb_j := l_item.upper
                until
                    j > nb_j
                loop
                    ...
                    j := j + 1
                end
            end
            i := i + 1
        end
    end

Other Well-Known Names

There are a number of other well know and simpler to use local variable names:

  • c for any type of character.
  • e for any type of exception (descendant of EXCEPTION).
  • s for any type of string (descendant of READABLE_STRING_GENERAL).
  • uc for a Unicode character.
  • us for a Unicode string (descendant of READABLE_STRING_32).
  • nb for a number or count of elements.

Rescue Clauses

When adding a rescue clause with a retry a state variable, typically used to determine if a retry has been performed, there is no need to use a local declaration prefix. In fact, it's recommended there is no prefix. Instead just use a variable named retried:

perform
        -- An example using a rescue/retry local variable name.
    local
        retried: BOOLEAN
    do
        if not retried then
            ...
        end
    rescue
        retried := True
        retry
    end

Object Tests

Object test locals obey the same rules and other standard local declarations, that it, prefixing a variable moniker with l_. However, due to the current scoping rules of object-tests, where no object test local may be reused, extraneous guidelines need to be defined.

close
        -- An example using object-test scoped local variable names.
    do
        if attached {DISPOSABLE_I} Current as l_disposable then
            l_disposable.dispose
        end
    end

In Contracts

Object tests may need to be defined in contracts, especially when projects/libraries are configured to use Void-Safe compilation checks. To prevent variable name conflicts from arising a secondary prefix should be used to define an object-test local. Again using l_ but this time prefixed with the first character of the enclosing assertion clause. Such rules would dictated the following prefixes to be used in object-tests, for assertion clauses:

  • rl_ for require
  • el_ for ensure
  • cl_ for check
  • ll_ for loop
  • il_ for loop invariant
  • vl_ for loop variant
close
        -- An example using object-test scoped local variable names in contracts.
    require
        is_interface_usable: attached {USABLE_I} Current as rl_usable implies rl_usable.is_interface_usable
    do
        ...
    ensure
        not_is_interface_usable: attached {USABLE_I} Current as el_usable implies not el_usable.is_interface_usable
    end

No prefix, other than l_ is needed for class invariants because no conflicts in variable name reuse exist in an invariant scope.

In-line Agents

There is no real preferred convention for local declaration inside in-line agents and the l_ prefix should be used if possible. However, for clarity this cannot always be such the case. When such as scenario arises the use of il_ (in-line local) is preferred. It is recommended that all locals utilize the same prefix and not mix l_ and il_!

l_action := agent (ia_string: READABLE_STRING_GENERAL)
    local
        il_i, il_count: INTEGER
    do
        ....
    end

Notice that even well-known local declaration names are prefixed, this is to avoid conflicts with the containing routine or in-line agent as well as providing consistency in the naming of local variables.

With nested in-line agents use the same name index injection guideline, placing the nested index after the initial i prefix. For a second level in-line agent, this would be i2l_.

Indexing Variable Names

There will be times when variable names clash with one another and there is no choice but to apply the last-stop effort to naturally indexed variable names to suit. This last-stop effort is really a last-stop. Other attempts should be made to create unique variable names before applying natural indexing.

Natural indexing concerns itself with suffixing variables with a sequential natural index. The only exception is the first local declaration which may or may not have the primary index suffix _1. To better illustrate, the following code examples are both valid uses of natural indexing:

perform
        -- An example of using natural sequential indexes to avoid variable name clashes.
    local
        l_item_1: ITEM
        l_item_2: ITEM
        l_item_3: ITEM
    do
        ...
    end

or

perform
        -- An example with the first index elided, which is also valid.
    local
        l_item: ITEM
        l_item_2: ITEM
        l_item_3: ITEM
    do
        ...
    end

If local declaration have to be indexed when first writing the code then it is far better to be explicit and use a natural sequential index for all similar local declaration (the former example). The latter example is valid and would exist when modifying existing code. There is no hard or fast rule here, each is valid as long as the indexes are sequential.

The examples apply to all variable declaration, not just local declarations.